Small diameter steel pipe manufacturer
The production and manufacturing process of small-diameter thick wall seamless steel pipe can be divided into four basic modes: cold drawing, cold rolling, hot rolling and hot expansion. The materials of steel pipe are 10#, 20#, 35#, 45# called ordinary steel pipe, which can be divided into structural seamless steel pipe according to the purpose; Seamless steel pipe for transportation; Seamless steel pipe for boiler; High pressure seamless steel pipe for boiler; High pressure seamless steel pipe for chemical fertilizer equipment; Seamless steel pipe for geological drilling; Seamless steel pipe for oil drilling; Seamless steel pipe for petroleum cracking; Seamless steel pipe for ships; Cold drawn cold rolled precision seamless steel pipe; Various alloy pipes. Small diameter thick walled steel pipes are mostly used in large-scale steel structure construction as the main support part, such as bridge piling, seabed piling and high-rise building piling.
Small diameter thick wall seamless pipe refers to the steel pipe with small ratio of outer diameter to wall thickness. The minimum diameter can reach 3mm and the minimum wall thickness can reach 1mm.
Weight formula of small diameter thick wall seamless steel pipe: [(outer diameter wall thickness) * wall thickness] * 0.02466 = kg / M (weight per meter)
It is mainly used as petroleum geological drilling pipe, cracking pipe for petrochemical industry, boiler pipe, bearing pipe, high-precision structural pipe for automobile, tractor and aviation, etc.
The materials of small-diameter thick wall seamless steel pipe include: 10#, 20#. 25 #, 35 #, 45 #, 16Mn, etc.
Round tube blank → heating → piercing → three roll cross rolling, continuous rolling or extrusion → pipe stripping → sizing (or reducing) → cooling → straightening → hydrostatic test (or flaw detection) → marking → warehousing
According to different production methods, it can be divided into hot-rolled pipe, cold-rolled pipe, cold drawn pipe, extruded pipe, etc. hot-rolled seamless pipe is generally produced on the automatic pipe rolling mill. The solid pipe blank is checked and cleared of surface defects, cut into the required length, centered on the end face of the perforated end of the pipe blank, and then sent to the heating furnace for heating. It is perforated on the piercer. It rotates and moves forward at the same time, Under the action of the roll and the plug, a cavity is gradually formed inside the pipe blank, which is called the rough pipe, and then sent to the automatic pipe mill for continuous rolling. Finally, the wall thickness is adjusted by the equalizer, and the diameter is determined by the sizing machine to meet the specification requirements. Using the continuous pipe mill to produce hot-rolled seamless steel pipe is a more advanced method. If you want to obtain seamless pipe with smaller size and better quality, Cold rolling and cold drawing or a combination of both must be adopted. Cold rolling is usually carried out on a two high rolling mill. The steel pipe is rolled in an annular pass composed of variable section circular hole groove and fixed conical plug. Cold drawing is usually carried out on a single chain or double chain cold drawing machine, that is, the heated pipe blank is placed in a closed extrusion cylinder, and the perforated rod moves together with the extrusion rod, The extrusion part is extruded from the smaller die hole, and the steel pipe with smaller diameter can be produced by this method.
10# seamless steel pipe
20# seamless steel pipe
45# seamless steel pipe
Sa106b seamless steel pipe
ST45.8 - Ⅲ low alloy seamless steel pipe
20Cr, 40Cr, 16Mn low alloy seamless steel pipe
Q345D low temperature alloy seamless steel pipe
27SiMn low alloy seamless steel pipe
12Cr1MoVG alloy pipe
15CrMo alloy pipe
10CrMo910 alloy pipe
Cr5Mo alloy pipe
A335p11 alloy pipe
10CrMo910 (P22) alloy pipe
A335P91 (T91) alloy pipe
Gangyan 102 (12Cr2MoWVTiB)
Structural pipe: (GB / t8162-2008)
Fluid pipe: (GB / t8163-2008)
Medium and low pressure boiler tubes: (GB / t3087-2008)
High pressure boiler tubes: (GB / t5310-2008)
Petroleum cracking pipe: (GB / t9948-2006)
Hydraulic prop pipe: (GB / t17396-1998)
Special pipe for chemical fertilizer: (GB / t6479-2000)
Steel pipe for drilling: (GB / t9808-2008)
Marine pipe: (GB / t5312-1999)
Alloy pipe: (GB / t8162-2008)
High pressure alloy pipe: (GB / t5310-2008) and a series of steel pipe products.
Materials: 10 #, 20 #, 35 #, 45 #, 20g, 20gr-50gr, 16mn-45mn, 27SiMn, Cr5Mo, 12CrMo (T12), 12Cr1MoV, 10CrMo910, T91, 15CrMo, 35CrMo, 40CrMo, etc.